Audiovox MVDVD2 - Manual (Page 13)

13
Remote Control
1 2
Open the cover. Insert batteries (AA size).
Make sure to match the + and - on
the batteries to the marks inside the
battery compartment.
PREPARING THE REMOTE CONTROL
To operate the DVD video player, insert the batteries into the remote con-
trol as follows:
NOTE:
Since incorrect use of batteries might cause them to leak or corrode,
observe the following precautions:
• Do not install the batteries in the wrong direction.
• It is dangerous to charge/heat/open or short-circuit the batteries.
• Do not leave dead batteries or mix old/new batteries in the remote control.
• When not using the remote control for a long period of time, remove the bat-
teries.
• When difficulties occur with the remote control, or if the operating range
becomes reduced, then replace the batteries.
• If leakage from the battery occurs, wipe the battery liquid from the battery
compartment, then replace the batteries.
3
Close the cover.