HP iPAQ hw6500 Unlocked Mobile Messenger series - Manual (Page 61)

Using the Phone Features 5–14
2. Hold down the green Answer/Send button until the
speakerphone dialog box comes on and the speakerphone icon
appears in the top Navigation bar.
SHORTCUT: From the Phone keypad, tap Tools > Speakerphone.
3. To turn off the speakerphone, hold down the Answer/Send
button again.
WARNING! Do not leave the phone in speakerphone mode and hold it
to your ear, the sound may temporarily impair your hearing.
Taking Notes During a Call
To create a note during a call, tap the Note icon in the Command bar
and enter or record your note.
Using Voicemail
The first speed dial location is set as a default for your voice mailbox
number. When you insert your SIM card into your HP iPAQ, it sets as
default the voice mailbox number of your mobile service provider. You may
need to configure your phone to the Voicemail setting by dialing or setting
the Voicemail dial number or password.
To retrieve your voicemail:
•
With the phone turned on and the phone keypad visible on the
screen, press and release the left side of the 5-way navigation
button, select 1 Voicemail, then press .
Putting a Call on Hold
During a phone call, tap Hold on the Phone keypad to put the call on
hold. The call on hold appears on the top right of the dialer screen. You
may switch between calls by tapping the call on hold.
Using Call Waiting
Call waiting notifies you of incoming calls when you are already in a
phone session.
To activate Call Waiting:
1.
From the Phone keypad, tap Tools > Options > Services tab.
2. Tap Call Waiting > Get Settings.
3. Select Notify me.
4. Tap OK.
NOTE: To stop using call waiting, select Do not notify me.