Cleaning the glass cooktop, Burned-on residue, Control knobs – GE PGP989SNSS User Manual

Page 13: Normal daily use cleaning, Stainless steel surfaces

Advertising
background image

Burned-On Residue

WARNING: DAMAGE to your glass surface

may occur if you use scrub pads other than

the pad included with your cooktop.

Allow the cooktop to cool.
Remove the burner grates, vent grille

and vent grille gasket. Spread a few

drops of CERAMA BRYTE

®

Ceramic

Cooktop Cleaner to the entire burned

residue area.

Using the included CERAMA BRYTE

®

Cleaning Pad for Ceramic Cooktops, rub

the residue area, applying pressure as

needed.

If any residue remains, repeat the steps

listed above as needed.

For additional protection, after all

residue has been removed, polish the

entire surface with CERAMA BRYTE

®

Ceramic Cooktop Cleaner and a paper

towel.

Use a CERAMA BRYTE

®

Cleaning

Pad for Ceramic Cooktops or a

Scotch-Brite

®

Multi-Purpose No

Scratch blue scrub pad.

13

The control knobs may be removed for easier

cleaning.
Make sure the knobs are in the OFF positions

and pull them straight off the stems for

cleaning.

To clean the knobs,

place them in a dishwasher

or wash with soap and water. Rinse with clean

water. Make sure the insides of the knobs are

dry before replacing.
Replace the knobs in the OFF position to ensure

proper placement.

Control Knobs

Flat

Molded flat area

The control knobs may be removed

for easier cleaning.

GEAppliances.com

Normal Daily Use Cleaning

ONLY use CERAMA BRYTE

®

Ceramic Cooktop

Cleaner on the glass cooktop. Other creams

may not be as effective.
To maintain and protect the surface of your

glass cooktop, follow these steps:

Before using the cooktop for the

first time, clean it with CERAMA BRYTE

®

Ceramic Cooktop Cleaner. This helps

protect the top and makes clean-up

easier.

Daily use of CERAMA BRYTE

®

Ceramic

Cooktop Cleaner will help keep the

cooktop looking new.

Remove the burner grates, vent grille and

vent grille gasket.

Shake the cleaning cream well. Apply a

few drops of CERAMA BRYTE

®

Ceramic

Cooktop Cleaner directly to the cooktop.

Use a paper towel or CERAMA BRYTE

®

Cleaning Pad for Ceramic Cooktops to

clean the entire cooktop surface.

Use a dry cloth or paper towel

to remove all cleaning residue.

No need to rinse.

NOTE: It is very important that you DO NOT

heat the cooktop until it has been cleaned

thoroughly.

Clean your cooktop

after each spill. Use

CERAMA BRYTE

®

Ceramic

Cooktop Cleaner.

Cleaning the glass cooktop.

Stainless Steel Surfaces

(on some models)

Do not use a steel wool pad; it will scratch the

surface.
To clean the stainless steel surface,

use warm sudsy water or a stainless steel

cleaner or polish. Always wipe the surface in

the direction of the grain. Follow the cleaner

instructions for cleaning the stainless steel

surface.

To inquire about purchasing stainless steel

appliance cleaner or polish, or to find the

location of a dealer nearest you, please call our

toll-free number:
National Parts Center

1.800.626.2002

GEAppliances.com

Advertising
This manual is related to the following products: