GE JB850EFES - Manual (Page 26)

26
Special features of your oven control.
Auto Recipe ™ Conversion (on some models)
When using convection bake, the Auto Recipe ™
Conversion feature can automatically convert
entered regular baking temperatures to
convection baking temperatures. The display
will not show the converted temperature. It will
always show the temperature entered.
To activate or deactivate the feature:
Touch the upper oven BAKE and BROIL
HI/LO pads at the same time until the
display shows SF.
Touch the CONVECTION COOK or
CONVECTION BAKE pad until the display
shows CON ON (Conversion On) or CON
OFF (Conversion Off) as desired.
Touch the START pad.
12-Hour, 24-Hour or Clock Blackout
Your control is set to use a 12-hour clock.
If you would prefer to have a 24-hour military
time clock or black out the clock display, follow
the steps below.
Touch the upper oven BROIL HI/LO and
BAKE pads at the same time until the
display shows SF.
Touch the CLOCK pad once. The display
will show 12 h. If this is the choice you
want, touch the START pad.
Touch the CLOCK pad again to change to the
24-hour military time clock. The display will
show 24 h. If this is the choice you want, touch
the START pad.
Touch the CLOCK pad again to black out the
clock display. The display will show OFF. If this is
the choice you want, touch the START pad.
NOTE: If the clock is in the black-out mode, you
will not be able to use the Delay Start function.
12-Hour Shutdown
Remote Enable
With this feature, should you forget
and leave the oven on, the control will
automatically turn off the oven after 12
hours during baking functions or after 3
hours during a broil function.
If you wish to turn OFF this feature, follow
the steps below.
Touch the upper oven BROIL HI/LO and
BAKE pads at the same time until the
display shows SF.
Touch the DELAY START pad until no
shdn (no shut-off) appears in the
display.
Touch the START pad to activate the no
shut-off and leave the control set in this
special features mode.
Allows the oven to be operated remotely.
Once connectivity is established, pressing
the Remote Enable pad allows the oven to
be operated from a mobile device. Opening
the oven door while the oven is idle, or
ending a cook cycle ends this capability and
requires the button to be pressed again to
enable remote operation. Both the and
the remote enable light in the display must
be solid and lit to allow remote operation.
If either the icon or the remote enable light
are not lit or are blinking, the remote enable
feature will not work. Additional guidance is
provided in the included insert and through
the mobile app.