GE ZIS420NX - Manual (Page 9)

DISPENSER MODELS:
RAISED OVERLAY PANEL DESIGN
When a raised panel design is to be used,
a custom wide middle rail is required to accept
the dispenser trim.
‡7KHPLGGOHUDLOPXVWEHZLGHHQRXJKWRDOORZ
for the dispenser trim to overlap the opening.
‡7KHPLGGOHUDLOPXVWEHµWRWDOWKLFNQHVV
to accept the dispenser trim.
9
DISPENSER TRIM FIT EXAMPLES:
(NOT TO SCALE)
1/4” FRAMED PANEL
‡7KHGLVSHQVHUWULPILWVRYHUWKHFXVWRP
SDQHODQGVQDSVLQWRWKHIUHH]HUGRRU
‡7KHFOLSVZLOOQRWHQJDJHWKHGRRU
LIWKHSDQHOLVPRUHWKDQµWKLFN
‡,IWKHSDQHOLVOHVVWKDQµWKLFN
a noticeable gap may be created
around the dispenser trim.
3/4” OVERLAY PANEL
‡7KHGLVSHQVHUWULPILWVRYHUWKHFXVWRP
SDQHODQGVQDSVLQWRWKHIUHH]HUGRRU
‡7KHFOLSVZLOOQRWHQJDJHWKHGRRU
LIWKHSDQHOLVPRUHWKDQµWKLFN
‡,IWKHSDQHOLVOHVVWKDQµWKLFN
a noticeable gap may be created
around the dispenser trim.
1/4" Backer Panel
.10" Spacer
3/4" Overlay Panel
Wide
Middle
Rail is
Required
Dispenser
Trim
16-3/4"
10-5/8"
Design Guide