GE ZISB360DX User Manual

Page 26

Advertising
background image

26

Questions?
Use this

problem

solver!

The Problem Solver

Built-In Refrigerators

PROBLEM POSSIBLE

CAUSE

WATER DISPENSER

• Water supply line turned off, restricted or not connected. Call your

DOES NOT WORK

installer for proper water supply line connection.

• Water filter clogged. Replace the filter or use the filter bypass plug.

The

CONTROL LOCK on the dispenser has been activated.

To unlock the dispenser, touch CONTROL LOCK for 3 seconds.

• Air may be trapped in system. Press the dispenser arm for at least

2

minutes.

ICE DISPENSER

• Ice bin improperly installed. See Ice storage bin.

DOES NOT WORK

• Icemaker turned off or water supply turned off. Turn on icemaker

or

water

supply.

• Ice cubes are frozen to the icemaker feeler arm. Remove cubes.

• Irregular ice clumps in storage bin. Break up with fingertip pressure

and discard remaining clumps.

• Freezer may be too warm. Adjust freezer control to a colder setting,

one position at a time, until clumps do not form.

Water filter clogged. Replace the filter or use the filter bypass plug.

7KH&21752//2&.RQWKHGLVSHQVHUKDVEHHQDFWLYDWHG





 7RXQORFNWKHGLVSHQVHUWRXFK&21752//2&.IRUVHFRQGV

WATER SPURTING

• Newly installed filter cartridge. Run water from the dispenser for

FROM DISPENSER

1 1/2 gallons (3 mins) .

NO WATER OR ICE

• Water supply line turned off, restricted or not connected. Call your

PRODUCTION

installer for proper water supply line connection.

• Water filter clogged. Replace the filter or use the filter bypass plug.

CUBED ICE WAS

Last

setting

was

CRUSHED ICE. A few cubes were left in the crusher

SELECTED BUT

from the previous setting. This is normal.

CRUSHED ICE

• If continual crushed ice is dispensed while cubed ice is selected,

WAS DISPENSED

adjust ice bin. See Ice storage bin.

• Packaging. Increase time or re-package in plastic.

• Wrong weight selected. Select a larger weight.

• Item with high fat content. Select a larger weight.

SELECT TEMP

• Fresh Food temperature control is set at warmest setting.

FEATURE ON

This is normal. In order to minimize energy usage, the Select Temp

CLIMATE CONTROL

feature is disabled when the Fresh Food control is set at the warmest

DRAWER IS NOT

setting.

WORKING

CLIMATE CONTROL

• Control Lock feature is active. Press and hold the CONTROL LOCK

DRAWER CONTROLS

pad on the Climate Control drawer for 3 seconds.

DO NOT WORK

FOOD IS NOT
THAWING/CHILLING
IN CLIMATE
CONTROL DRAWER

Advertising