Light bulbs, Care and cleaning, Warming lamps – GE ZV36TSFSS User Manual

Page 8: Stainless steel surfaces (on some models)

Advertising
background image

8

Light bulbs

7KHEXOEVDUHORFDWHGRQWKHXQGHUVLGHRI

the hood.

7RFKDQJHWKHOLJKWEXOEV

1. Remove the trim ring by turning it

counterclockwise.

2. Grasp the bulb on the edges and remove

by turning it counterclockwise.

3. Replace with the same type and size bulb.

These 120 volt, 50 watt, par 16 halogen flood
bulbs, with standard base, are available at
specialty lighting stores.

7KHVHEXOEVFDQDOVREHRUGHUHGIURP\RXU
*(VXSSOLHU

Order bulb no. :%;.

Care and Cleaning

Professional Range Hood

Warming

lamps

7KHZDUPLQJODPSVDUHORFDWHGRQWKH

underside of the hood.

These 120 volt, 175 watt, par 38 infrared heat
lamp bulbs, with standard base, are available
at some specialty lighting stores.

7KHVHLQIUDUHGEXOEVFDQDOVREHRUGHUHG
IURP\RXU*(VXSSOLHU

Order bulb no. :%;.

127( If warming lamps are not desired,

additional cooktop lighting can be obtained
by replacing the infrared bulbs with standard
incandescent bulbs with up to 100 watt
maximum ratings, with standard bases. These
bulbs are available at specialty lighting stores.

'RQRWXVHDVWHHOZRROSDGLWZLOOVFUDWFK

the surface.
To clean the stainless steel surface, use warm sudsy

water or a stainless steel cleaner or polish. Always

wipe the surface in the direction of the grain. Follow

the cleaner instructions for cleaning

the stainless steel surface.

To inquire about purchasing stainless steel

appliance cleaner or polish, or to find the location

of a dealer nearest you, please call our toll-free

number:
National Parts Center

1.800.626.2002

*($SSOLDQFH3DUWVFRP

Stainless

steel

surfaces

(on some

models)

Advertising
This manual is related to the following products: