5 power menu, 1 suspend mode, 2 acpi 2.0 support – Asus P5KPL-AM/PS User Manual

Page 56: 3 acpi apic support, Power menu -16, 1 suspend mode -16, 2 acpi 2.0 support -16, 3 acpi apic support -16, 1 suspend mode [auto, 2 acpi 2.0 support [disabled

Advertising
background image

2-16

ASUS P5KPL-AM

PCI Latency Timer [64]

Allows you to select the value in units of PCI clocks for the PCI device latency timer register.

Configuration options: [32] [64] [96] [128] [160] [192] [224] [248]

Allocate IRQ to PCI VGA [Yes]

When set to [Yes], BIOS assigns an IRQ to PCI VGA card if the card requests for an IRQ.

When set to [No], BIOS does not assign an IRQ to the PCI VGA card even if requested.

Configuration options: [Yes] [No]

Palette Snooping [Disabled]

When set to [Enabled], the pallete snooping feature informs the PCI devices that an

ISA graphics device is installed in the system so that the latter can function correctly.

Configuration options: [Disabled] [Enabled]

IRQ-xx assigned to [PCI Device]

When set to [PCI Device], the specific IRQ is free for use of PCI/PnP devices. When set to

[Reserved], the IRQ is reserved for legacy ISA devices.

Configuration options: [PCI Device] [Reserved]

2.5

Power menu

The Power menu items allow you to change the settings for the Advanced Power

Management (APM). Select an item then press <Enter> to display the configuration options.

Select Screen

Select Item

+- Change Option

F1 General Help

F10 Save and Exit

ESC Exit

Suspend Mode

[Auto]

ACPI 2.0 Support

[Disabled]

ACPI APIC Support

[Enabled]

APM Configuration

Hardware Monitor

Select the ACPI state

used for System

Suspend.

2.5.1

Suspend Mode [Auto]

Allows you to select the Advanced Configuration and Power Interface (ACPI) state to be used

for system suspend. Configuration options: [S1 (POS) Only] [S3 Only] [Auto]

2.5.2

ACPI 2.0 Support [Disabled]

Allows you to add more tables for Advanced Configuration and Power Interface (ACPI) 2.0

specifications. Configuration options: [Disabled] [Enabled]

2.5.3

ACPI APIC Support [Enabled]

Allows you to enable or disable the Advanced Configuration and Power Interface (ACPI)

support in the Application-Specific Integrated Circuit (ASIC). When set to Enabled, the ACPI

APIC table pointer is included in the RSDT pointer list.

Configuration options: [Disabled] [Enabled]

Advertising
This manual is related to the following products: