BMR Suspension CB002 User Manual
BMR Suspension For the car
THIRD GENERATION CHASSIS BRACE
Part # CB002
INSTALLATION:
1. The vehicle must have a loaded suspension in order to install the brace. This may be accomplished with
the vehicle on ramps or by using a 4 point service lift.
2. Loosen and remove the 4 bolts that fasten the front sway bar to the frame.
3. Position the brace between the frame mounts and the sway bar brackets (it will only fit one way).
4. Reinstall the 4 original bolts, clamping the BMR chassis brace between the frame mounts and the sway
bar brackets. Retighten the bolts.
WWW.BMRFABRICATION.COM
This product is an aftermarket accessory and not designed by the manufacturer for use on this vehicle. As such, buyer assumes all
risk of any damage caused to the vehicle/person during installation or use of this product.