DiabloSport Predator Revision Update Instructions - Using Legacy Connect - Manual (Page 14)

10. A new window will appear, asking you to power cycle the tool to continue. Unplug AC
adapter unit from the top of the Predator and plug it right back in.
Troubleshooting Note: If the driver program is installed (Device Status reads “Device is
working properly”) and the DSDownloader is not sensing the power cycle, it is likely a bad
cable or faulty USB port.
11. Once the unit powers back up, the DSDownloader will see the power up message and tell
you that ‘the tool is ready, do you wish to download firmware?’, click Yes, and the
DSDownloader will send the crom file to the tool.
12. The DSDownloader will show you the file transfer status.