Fantasea Line Nano Adaptor Kit - Manual

Nano, Remora and Sea & Sea Strobes FO 20090618
1
Using the Fiber Optic Cable with
Nano, Remora and Sea & Sea Strobes
The Nano, Remora and Sea & Sea strobes are capable of synchronizing with the
camera's internal flash without a fiber optic cable in most diving conditions. They
feature a slave sensor that triggers the strobe to fire along with the camera's internal
flash, as long as the strobe and the camera are positioned on the same axis.
The fiber optic cable, however, ensures the best synchronization between the
camera's internal flash and the external strobe in all angles and in various diving
conditions.
Step 1 ‐ Attaching the Fiber Optic Cable to the Nano, Remora or Sea & Sea Strobe
a) The fiber optic cable consists of two ends: One is attached to a white plastic
fitting (flat white plastic at the end of the cable with Allen screw inside), and
the other is loose (figure A).
Insert the exposed end of the fiber optic cable (the end without the fitting)
into the small hole of the adaptor unit until the fiber optic cable reaches the
end of the adaptor.
Figure A
Fiber Optic Cable