MBRP S7258 - Manual (Page 3)

S7258 © 06/13 PAGE 3 OF 3
2. Install both Driver and Passenger Extension Pipes over the axle and
insert into the Driver and Passenger Mufflers. Be sure that the supplied
Clamps are installed over the joint. Do not tighten yet.
Refer to Figure 6.
3. Connect both Driver and Passenger Extension pipes by first installing
the OEM band clamp removed in Step 2 onto the inlet ends of the Extension
Pipes. Slide the Extension Pipes onto the outlet ends of the H pipe. Do
not tighten yet.
Refer to Figure 7.
4. Tighten all clamps just enough to hold the pipes in place but allowing
for adjustment.
5. Reattach the Panhard Bar Brace to the Driver side Frame rail with the
supplied M10x50 bolts and Spacers to allow more clearance for the
Driver Side Extension Pipe. Install the Tips onto the Muffler outlets.
Refer to Figures 8 and 9.
6. Adjust the system to provide clearance between all other under body
components and hoses while ensuring the Tips are centered in the rear
Fascia. Tighten all clamps once properly adjusted.
Congratulations! You are ready to begin experiencing the improved power, sound and driving excitement of your
MBRP Inc. performance exhaust system. We know you will enjoy your purchase.
Figure 6
Figure 7
Figure 8
Figure 9