Schumacher PC-6 - Manual (Page 2)

2
SAVE THIS OWNER’S MANUAL AND READ BEFORE EACH USE.
Model PC-6: This manual will explain how to use the converter safely and effectively.
Please read and follow these instructions and precautions carefully. This manual also
contains important safety and operating instructions for AC-DC Converter.
WARNING: Handling the cord on this product or cords associated with this product, may
expose you to lead, a chemical known to the State of California to cause cancer and birth
defects or other reproductive harm. Wash hands after handling.
CAUTIONS:
• For Indoor use only - Do not expose
converter to rain or snow.
• Do not open unit; risk of electrical
shock.
• The 12 volt socket is wired so the center
conductor is positive (+) and the outer
sleeve is negative (-). Please confirm
that the 12V plug being used is wired
the same way.
• Must use a heavy duty #18 AWG
extension cord – 50 foot maximum
length.
• Do not put fingers into 12V receptacle.
• To insure proper ventilation, always rest
unit on its base.
• Unit gets hot - do not set converter on
flammable materials like carpeting,
upholstery, paper, cardboard, etc.
• To reduce risk of electrical shock,
unplug the converter from the 120V AC
electrical outlet before attempting any
maintenance or cleaning.
• Do not operate the converter if it has a
damaged power cord or plug. Have the
cord replaced.
• Never pull out the plug by its cord when
unplugging the converter. Pulling on the
cord may cause damage to the cord
and/or plug.
• Never operate converter if it has been
dropped or otherwise damaged. Take it
to a qualified professional for inspection
and repair.
• Do not disassemble converter. Take
it to a qualified service professional if
service or repair is required. Incorrect
assembly may result in fire or electrical
shock.
Using your AC to DC Converter:
• Plug converter into a 120V AC outlet.
The Green “Power ON” LED will
illuminate when properly functioning.
• Inser t 12V accessor y plug into
converter’s socket (maximum 6 Amps
or 72 Watts).
Disconnecting your AC to DC
Converter:
• Remove the 12V plug from the
converter.
• Disconnect converter from the 120V AC
outlet.
• Let converter completely cool before
storing.
Troubleshooting
Check items below if appliance is not
functioning:
• Confirm converter’s green light is ON.
If not, confirm the AC outlet is live. If
AC outlet has no power, check wall
switches, breakers and fuses.
• If green light is On and appliance is not
functioning:
1. Remove and re-insert the appliance’s
12V plug into the converter’s 12V
socket to ensure good connection.