Alpine CRA-1667RF - Manual (Page 15)

13
-EN
Storing XM Channel Presets
1
Press the BAND button on the Remote Control to
select the desired band (XM1 or XM2) you want to
store.
2
After tuning in the desired channel, press and hold the
rotary encoder of the Remote Display for at least 2
seconds until the channel name on the display blinks.
3
Turn the rotary encoder of the Remote Display to
select the preset No. you want to store.
4
Press the rotary encoder of the Remote Display into
which you wish to store the channel while the channel
name display is blinking (within 5 seconds).
The display stops blinking once the channel has been
memorized. The display shows the band, preset No.
and channel name memorized.
5
Repeat the procedure to store up to 5 other channels
onto the same band.
To use this procedure for other bands, simply select the
band desired and repeat the procedure.
A total of 12 channels can be stored in the preset
memory (6 channels for each band; XM1 and XM2).
NOTE
If you store a channel in a preset memory which already has a
station, the current channel will be cleared and replaced with the
new one.
Receiving Stored XM Channels
1
Press the BAND button on the Remote Control to
select the desired band (XM1 or XM2).
2
Press the 4 or 3 button of the Remote Display, or the
8 or 9 button of the Remote Control that has your
desired satellite channel in memory.
Category Search
Category Search functionality allows you to search for a
specific channel by the category of programming it
offers, or to surf within a given category.
1
In XM mode, press the rotary encoder of the Remote
Display or the -/J button of the Remote Control to
display the category of the channel that is currently
selected for 5 seconds.
2
While the category is displayed, turn the rotary
encoder of the Remote Display, or press the g or
f button of the Remote Control to select a different
category (or leave it to stay with the same category.)
NOTE
You can also press the ( or ) button of the Remote
Display to select a category.
3
Within 5 seconds of selecting the category, press the
rotary encoder of the Remote Display or the -/J
button of the Remote Control again to select the next
channel within that category. Repeatedly press the
rotary encoder of the Remote Display or the -/J
button of the Remote Control within 5 seconds to
select additional channels within that category.
When tuned in, the category is displayed for 5
seconds, then the display returns to normal mode.
NOTE
If you cannot find your desired category, the display shows “----”
for 2 seconds automatically.
Changing the Display
Text information, such as the channel name, artist
name/feature, and song/program title, is available with
each XM channel. The unit can display this text
information as explained below.
1
In XM mode, press the DISP button of the Remote
Display or the Remote Control.
Each time you press this button, the display changes
as shown below.
NOTE
Depending on the model, the display may differ from the one
shown above.
Channel Name
display → → → Artist Name
display Song Title
display