GReddy AIR INTAKE SYSTEMS: Lexus IS250 / IS350 2006-10 - Manual

Installation
1
Complete Stock intake. Please disconnect battery
terminals before installation.
2
Remove engine cover and front/passenger plastic
covers.
3
With 10mm socket or wrench loosen the 2 bolts hold-
ing in bottom half of air box and remove.
7
Remove MAF sensor using phillips screwdriver.
8
With provided M4 screws, install MAF sensor to new
intake tube.
9
With 10mm socket and ratchet, loosen the two
clamps using a 10mm socket or wrench from the
OEM intake tube and airbox. Disconnect MAF sensor
harness.
4
Remove crank case line from stock intake tube.
5
Carefully remove stock air box assembly out of vehicle.
6
06-80507 Pg1
Parts Identification:
1 Air filter ( ™ 61-90133)
1 Intake tube, 05-T2004P1
1 Housing, wrinkle black 05-T2004B2
1 Adaptor, 3-angle filter
1 Coupling, straight 05-00664
1 Coupling, reducer 05-00612
2 Clamp #048
1 Clamp #072
1 Clamp #060
1 Trim, rubber edge 1/16” @ 12”L
1 Trim, rubber edge 1/16” @ 24”L
3 Screws, button head
2 Flat washer M6
2 Hex screw M6
2 Screw M4 x .7 x 8
Tools Required:
10mm socket or wrench
Ratchet w/ extension
Phillips screw driver
Flat head screw driver
5/16” nut driver
Pliers
4mm allen key
Note: Read instructions before
installation and have tools ready.
Kit P/N:
12519002
Make:
Lexus
Model: Year: Engine:
IS250 06-12 V6-2.5L
IS350 06-12 V6-3.5L