Monoprice 8745 Wireless N PoE Access Point - Manual (Page 50)

46
specifically enter the SSID to make a
connection. Since the Repeater mode is not
intended for use by normal wireless clients, it
may be best to disable this feature.
 MBSSID AP Isolation: This feature is
designed to isolate clients accessing the AP
using the same SSID. When this feature is
enabled, wireless clients connected to the AP
using the same SSID cannot communicate
with each other. For example, configuring the
main SSID as AP1 and the minor SSID as AP2:
PC1 and PC2 are connected to AP1 and PC3 is
connected to AP2. PC1 and PC2 cannot
communicate with each other, but each can
communicate with PC3.
 AP Isolation: This feature is designed to
isolate communications between clients
using different SSIDs. When this feature is
enabled, each of your SSIDs will operate as if
it is a virtual network of its own and PCs on
one SSID will not be able to communicate
with PCs on the other. For example,
configuring the main SSID as AP1 and the