Pure Contour 100Di - Manual (Page 13)

11
Using the alarms
Contour 100Di has two alarms which you can set to sound a tone, tune to a radio
station or play a track from your iPod/iPhone.
Setting an alarm
Press the Alarm button on the remote to show the
status of Alarm 1, press or to show the status of
Alarm 2.
Press the
Select button to choose and adjust either
alarm and press or and Select to adjust the
following settings:
Alarm on/off
Press or to choose between ‘ON’ (alarm sounds)
or ‘OFF’ (alarm does not sound) and press
Select.
Time
Set the alarm time. Press or to adjust the hours
then press
Select. Repeat to set the minutes then
press Select.
Days
Set the days that the alarm sounds. Press or
to choose between: DAILY (every day), ONCE (no
repeat), WEEKENDS or WEEKDAYS (Monday to
Friday) then press
Select.
Type
Press or to choose between: DIGITAL, FM, IPOD
or TONE (buzzer).
Station
If you’ve set alarm mode as DIGITAL or FM, press
or to choose between: LAST USED (Last station
tuned to) or select a favourite if you have any saved.
Note: NO PRESETS is displayed if you have not
created any favourites.
Volume
Press or to change the alarm volume then press
Select.
DR
DR
DAILY
DR
LAST USE
DR
DR
DIGITAL
DR
DR
ON
Contour_100Di-V3_manual-UK-Aus.indb 11 12/18/2012 4:33:49 PM