Racing Electronics SC180 - Manual (Page 10)

B. Channel Number — Indicates the current
channel that the scanner is on.
C. Memory Bank Numbers — Each Memory Bank
consists of 10 channels that you can select or
deselect during scanning operation, using the
numeric keypad. When you select a Bank, its
number appears on the display. When you
deselect a Bank, its number disappears from the
display. When you press
to stop
scanning, only the Bank of the current channel
appears.
D. Bank Indicator — Appears with the Bank
Numbers (1~10).
E. Frequency Indicator — Indicates the frequency
being received by the scanner, or Alpha Name,
etc.
F. Low Battery Indicator — Appears on the
display when the Battery Pack is low and needs
recharging.
G. Mode/Function Indicators — (Only the active
mode(s)/function(s) are displayed during
operation.)
SCAN Indicates SCAN Mode.
SEARCH Indicates SEARCH Mode. Flashes
when in TURBO SEARCH Mode.
PRIORITY Indicates PRIORITY SCAN is
activated.
HOLD Indicates SCAN HOLD or SEARCH
HOLD Mode.
DELAY Indicates DELAY is activated.
L/O In SCAN Mode, indicates the
channel shown is “Locked Out”.
In SEARCH Mode, indicates the
frequency shown is “Locked Out”.
WX Indicates WEATHER SCAN Mode.
ATT Appears when the Attenuator
function is set.
Indicates the keypad is locked.
Appears when the display mode is
Alpha Name mode.
2. Press to start scanning all programmed
channels that are not locked out. (SCAN moves
across the display during scanning.)
7