Coroturn® xs for internal machining – Sandvik Coromant Parting and grooving - users guide User Manual
Page 55
53
CoroTurn® XS for internal machining
(Diameter area from 4.2–12 mm)
For internal grooving CoroTurn XS is the ideal tooling family. The smallest bore possible for
grooving with CoroTurn XS is 4.2 mm and is available with different insert widths.
This tooling system has four insert sizes dedicated to different bore diameters. Also a range
of various lengths is available for specific applications. However, the shortest possible over-
hang should always be the first choice.
CoroTurn XS is precision made and both holders and inserts are made to withstand the
demands of many applications. Accurate clamping of the insert ensures correct centre height
is maintained at all times.
Always correct centre height with CoroTurn XS.
CoroTurn XS – four insert sizes and various insert lengths.