Summers Superchisel - 3-Section - Manual (Page 105)

SECTION 6 – PARTS (16’-44’ : OPTIONAL)
6-21
1. 52” mounting arms (PN 8H2314) should be used when attaching Summers mounted harrows.
2. Mounting arm location can be found on the following layout drawings.
– In certain locations, the mounting arm will be installed directly behind a liftarm pivot. A
spacer block has been welded to the chisel plow frame so there is no interference be-
tween u-bolts and mounting head.
NOTE: Make sure that if one mounting arm rests against a spacer block, the other mounting arm,
on that section, also rests against a spacer block.
3. Adjust harrows according to performance desired.
– Model 106 harrows require the mounting arm support rod (PN 8H1315) to be moved to
the hole that raises the harrow most (C).
MOUNTING ARM ASSEMBLY 3/17/2014 8H2314.iam/
A
A B C
C
B
A
3" 4"
5"
6"
2 1/2"
FRAME SIZES
8H2104
CHANNEL 6"
8H2102
CHANNEL 4"
8W1897
8H1394
8D5219
8H1307
8H1315
8H1327
8H2131A
8X0269
8X0073
1/2 X 5"
8X0123
3/4" X 5.5"
8X0117
3/4 X 7"
8X0304
5/8" LW
8X0099
5/8" X 6-3/4"
8H2100
8X0306
3/4" LW
8X0261
3/4" LN
8X0261
3/4" LN
8X0242
NY-LOCK 1/2" N
8X0261
3/4" LN
8X0222
1/4" LN
8X0014
1/4 X 3"
8X0118
3/4 X 4"
8H2190
8H1280
8X0246
1/2" FN
8W1204
1/2 X 3 X 3"
WING-ARM TRAVEL STOP
MATCH LOCATION LETTER
ON SUPPORT ROD ASSEMBLY
WING-ARM TRAVEL STOP
MATCH LOCATION LETTER
ON SUPPORT ROD ASSEMBLY
ARM LENGTH
8H2132 - 34"
8H2142 - 42"
8H2144 - 52"
8Z0101
SMC DECAL
8Z0052
PATENT DECAL
8X0101
5/8" X 8" (SC)
8X0250
5/8" N
8H2184