Kenwood KDC-X898 - Manual (Page 5)

English | 5
Preparations
Detaching/ Attaching the faceplate
Press the
Release button.
!
• Remove the faceplate at once after
pressing the Release button; otherwise it
can fall down due to vibration.
• The faceplate is a precision component of
the unit and can be damaged by shocks
or jolts.
• Keep the faceplate in its case while
detached.
• Do not place the faceplate (and case) in
areas exposed to direct sunlight, excessive
heat or humidity. Also avoid places with
too much dust or the possibility of water
splashing.
FRONT/ REAR USB terminal
A USB device or iPod can be connected.
The CA-U1EX (Max. 500mA) (optional
accessory) is recommended to connect
a USB device.
The KCA-iP102 (optional accessory) is
recommended to connect a iPod.
When connecting devices featuring the
Lightning connector, KCA-iP102 (optional
accessory) and Apple Lightning to 30-pin
Adapter are necessary.
Do not keep Apple Lightning to 30-pin
Adapter in your car to avoid the damage
by heat.
USB maximum power supply current
: DC 5 V
= 1 A