Kenwood DDX5025BT - Manual (Page 41)

ENGLISH 41
SETTINGS
Adjusting the Digital Time Alignment (DTA)
Make fine adjustment of the delay time of the
speaker output to have a more suitable environment
for your vehicle.
1 Display the <Position>
2 Display the <Position DTA> screen.
3 Select the speaker you want to adjust (1),
and then adjust each item (2).
<Distance> Adjusts the Digital Time
Alignment (DTA) value.
<Gain> Adjusts the output volume of
the selected speaker.
• To determine the adjustment value, see the
right column.
• To initialize the setting value, press
[Initialize].
Determining the value for <Position DTA>
adjustment
If you specify the distance from the center of the
currently set listening position to every speaker,
the delay time will be automatically computed
and set.
1
Determine the center of the currently set
listening position as the reference point.
2 Measure the distances from the reference point
to the speakers.
3 Calculate the differences between the distance
of the furthest speaker and other speakers.
4 Set the DTA value calculated in step 3 for
individual speakers.
5 Adjust gain for individual speakers. A sound
image will be shifted to the speaker with
increased gain.
Example: When [Front LR] is selected as the
listening position
m c 0 5 1
m c 0 6
m c 0 8
m c 0 +
m c 0 9 +
m c 0 7 +
k c a b y a l p o e d i v r o f t n e m t s u j d A
❏ e r u t c i p e h t g n i t s u j d A
You can adjust the picture quality.
1 Display the adjustment menu.
2 Select [DIM ON] (dimmer on) or [DIM OFF]
(dimmer off).
Continued to the next page...
DDX_Mid_E.indb 41 2014/01/23 19:49