ATEN ALTUSEN KM0832 - Manual (Page 31)

Chapter 2. Installation
15
Rack Mounting—Front
1. Remove the two screws that secure the detachable front panel to the chas-
sis. (See Step 1 under Rack Mounting—Split, page 13.)
2. Use the M3 x 8 Phillips head hex screws supplied with the rack mounting
kit to screw the rack mounting brackets into the sides at the front of the
unit.
3. Place the switch in the rack. Position it so that the holes in the mounting
brackets line up with those in the rack. Secure the mounting brackets to the
front of the rack. Cage nuts are provided for racks that are not prethreaded.
Phillips head hex
M3 x 8