MagTek Bluetooth MagneSafe V5 Swipe Reader - Manual (Page 11)

Section 1. Features and Specifications
3
SPECIFICATIONS
Table 1-2 lists the specifications for the Bluetooth MagneSafe Reader. Figure 1-2 shows the
dimensions of the Reader.
Table 1-2. Specifications
Reference Standards ISO 7810 and ISO 7811; AAMVA*
Power Input USB port or 5 VDC for battery charging
Time to Charge Battery About 4.5 hours (from a fully discharged state)
Recording Method Two-frequency coherent phase (F2F)
Message Format ASCII
Card Speed 4 to 60 ips (10.1 to 152.4 cm/s)
Card Swipes per Full Charge Over 500 swipes
ELECTRICAL
Current 100mA maximum during charge
MECHANICAL – BT90 Bluetooth
Dimensions
Length 3.49” (88.65mm)
Width
0.90” (22.86mm)
Height 1.17” (29.72mm)
Weight 1.4 oz. (39.7 gr)
Cable length n/a
Connector USB Mini B 5-pin
ENVIRONMENTAL
Temperature
Operating 0 °C to 45
°C ((32 °F to 113 °F)
Storage -20
°C to 60 °C (-4 °F to 140 °F)
Humidity
Operating 10% to 90% noncondensing
Storage 10% to 90% noncondensing
* ISO (International Standards Organization) and AAMVA (American Association of Motor
Vehicle Administrators).