Clary SP Series-Model PD - Manual (Page 33)

T H E C O N T I N U O U S P O W E R C O M P A N Y
33
4.7 Event Log
Displays a history of the most recent 100 logged events. Once at this screen, press the ENTER/SHOW
TIME button. Then press the SELECT/MENU MODE button to go to the logs.
Use the Arrow Keys to scroll through the logs. Press and hold both the up and down arrow keys
simultaneously to clear all the event logs.
4.8 Options
Displays the current system option values and allows selected options to be modified.
Once at this screen, press the ENTER/SHOW TIME button. Then press the SELECT/MENU MODE
button to go through the options menu.
Not used. For future use.
This is the time in minutes that specifies the trip point that activates the Timed NO/NC contacts on the
UPS. Used for delayed flash. Make sure you have change the Flash Status Pin to “ON” to activate this
feature. To Change the value, press the arrow buttons. Once at the desired value, press the
Enter/Show Time button to save. The screen will now show the new value. Default is 120.
Status: EVENT LOG’s
LOG# 100 AC FAIL
mm/dd/yy hh/mm/ss
Status: OPTION’s
INTERFACE DELAY
current value = 2
FLASH TRIGGER (MINS)
current value = 120