LBL Lighting Icicle II SP - Manual

1
Installation Instructions for
Icicle II 1.0 HS397OP_2J60
980ICCLIISP
G P I : ENERAL RODUCT NFORMATION
This product can mount to either a 4" square electrical box with
round plaster ring or an octagon electrical box.
This product is suitable for indoor dry locations only.
This product can be dimmed with a standard incandescent dimmer.
Install the Lamp and Glass Shield
SOCKET
Use Volt, Watt Type E11 MAX 60 120
Base Mini Candelabra Lamp.
C AUTION:To reduce the risk of a burn or electric shock
during relamping, disconnect the power to the fixture.
NOTE: Use only your fingers and a soft cloth to replace
the lamp.
Screw the lamp completely into the socket.
LAMP
SPRING CLIP
LAMP SHIELD
Push the lamp shield completely onto the socket spring clips.
Suspension
1A
2
CAUTION - RISK OF FIRE
This product must be installed in accordance with
the applicable installation code by a person familiar
with the construction and operation of the product
and the hazards involved.
Use minimum 90°c supply conductors.
1 1
1B