Campbell Scientific CR3000 Micrologger - Manual (Page 112)

Section 7. Installation
112
the BeginProg statement. This allows the "Include" file to act both as an
"Include" file and as the default program.
5. If the program listed in the Include File Name setting cannot be run or if no
program is specified, the CR3000 will attempt to run the program named
default.cr3 on its CPU: drive.
6. If there is no default.cr3 file or it cannot be compiled, the CR3000 will not
automatically run any program.
7.6.3.5 Network Planner
Figure 47: Network Planner Setup
7.6.3.5.1 Overview
Network Planner allows the user to:
• create a graphical representation of a network, as shown in figure Network
Planner Setup
(p. 112).
• determine settings for devices and LoggerNet.
• program devices and LoggerNet with new settings.
Why is Network Planner needed?
• PakBus protocol allows complex networks to be developed.
• Setup of individual devices is difficult.
• Settings are distributed across a network.
• Different device types need settings coordinated.