Campbell Scientific HS2 and HS2P (HydroSense II) - Manual (Page 43)

Appendix A. Configuration Menus
A.17 System Settings
This submenu contains a list of system-wide settings. Using the
buttons, highlight one of the options shown and press . Alternatively,
press to exit the menu.
A.18 System on Time
To save power, the HydroSense II will automatically power off after a period
of inactivity. This menu allows configuration of this time period. Press the
buttons to choose a timeout period and press . Pressing will exit
without saving.
If the system on time is set to “Always on” the HydroSense II will only turn off
when the
button is used. This will increase the average power
consumption significantly. If the device is left running by accident, the
batteries are likely to be exhausted in just a few days.
A.19 Restore Settings
This menu restores the HydroSense II to its factory defaults. Press to
overwrite all configuration settings with default values or to exit without
changing settings.
This step cannot be undone. If the unit is inadvertently set to factory defaults,
all settings will need to be restored manually through the previous menus.
A-7