Campbell Scientific Solar1000 Station - Manual (Page 16)

CM106 Tripod
Strip 1/2” of insulation from the ends of the green 12 AWG wire. Attach one
end of the wire to the tripod ground lug, and the other end to the enclosure
ground lug as shown in Figure
1.5-9.
Mount the lightning rod and clamp to the tripod mast with pointed tip up, and
notch at bottom, as shown in Figure
1.5-9.
Lightning Rod
Clamp
FIGURE 1.5-9. Lightning Rod and Tripod Grounding Lug
12