Pro-Lite BL3225RB - Manual (Page 2)

IMPORTANT SAFETY INSTRUCTIONS
READ BEFORE OPERATING DISPLAY
Do not plug more than two plugs into a single outlet.
Sharing several plugs on a single outlet is a fire hazard and may cause overheating.
Do not bend, twist, or place heavy objects on the power cord.
Excessive binding or twisting may cause the wires inside to short circuit
causing a potential fire hazard.
Do not touch outlet or handle power plug with moist or wet hands.
This may cause electrical shock and serious injury.
The power plug must be securely connected to the outlet.
Loose plugs can be hazardous and cause serious injury.
Do not open, modify or disassemble any part of the display.
This will void warranty and may result in electrical shock and serious injury.
If there is any sign of smoke or unusual burning odor from the operation of
this display, unplug the unit immediately and contact the Pro-Lite Service
Center. Continued operation during smoke or unusual burning odor can be
dangerous and result in a fire or serious injury.
Handle with care when transporting or carrying the display.
Dropping the display may cause permanent damage and void warranty.
During installation, properly mount and fastened the display.
Improperly mounted displays can fall causing bodily harm and injury.
Do not allow the sign to swing. Do not install near a magnetic source.
These may cause the display to operate undesirably.
Do not open, modify or disassemble the remote control.
This may cause permanent damage to the remote and void warranty.
Do not share or split the power cable of the display.
This may cause serious injury and electrical shock.