Actron OBD II POCKETSCAN CP9125 - Manual (Page 11)

5.Press and Hold ERASE Key for
3 Seconds and Release.
6.Observe “ERASE?” Displays.
7.Press and Hold ERASE Key
for 3 Seconds and Release.
8.Observe a Moving
-
on Display.
NOTE: If a “NO LINK” message
displays, cycle ignition key to
the OFF position for 10
seconds, then back ON, and
repeat “Erasing Diagnostic Data.”
9.Observe “DONE” Displays.
NOTE: If the problem causing Diagnostic Trouble Code(s) still
exists, the code will return. The Diagnostic Trouble
Code may return immediately or may return after vehicle
has been driven.
NOTE: Pressing READ /Scroll Down key will read
Diagnostic Trouble Codes and Data and Holding
ERASE key will erase results again.
11
ERASE?
-
DONE
NO LINK