Enable snmp community – Allied Telesis AT-S63 User Manual
Page 103
AT-S63 Management Software Command Line Interface User’s Guide
Section I: Basic Features
103
ENABLE SNMP COMMUNITY
Sy nt a x
enable snmp community="
community
"
Pa r a me t e r
community
Specifies an SNMP community string. This
parameter is case sensitive. The name must be
enclosed in double quotes if it contains a space or
other special character such as an exclamation
point. Otherwise, the quotes are optional.
De s c r i pt i on
This command activates a community string on the switch. The default
setting for a new community string is enabled. You can use this command
to enable a community string that you disabled with the DISABLE SNMP
COMMUNITY command.
Exa mpl e
The following command enables the SNMP community string “private”:
enable snmp community=private