Allied Telesis AT-S26 User Manual
Page 103
AT-S26 Version 2.0.1 User’s Guide
103
2. Select Virtual LAN definitions.
The program displays the VLANs window. This window lists the
VLANs currently existing on the switch. The window provides the
name of each VLAN along with the ports on the switch that are
members of the VLAN. Figure 45 is an example of the window.
Figure 45 VLANs Window
The example shows that there are three VLANs on the switch: Default
VLAN with ports 5 and 6; Building102 VLAN with ports 1 and 2;
Building103 VLAN with ports 3 and 4.
3. Select Add new table entry.
The VLAN Configuration window shown in Figure 46 is displayed. You
use this window to specify the parameters for the new VLAN, such as
its name and the ports on the switch that will be members of the
VLAN.
Figure 46 New VLAN Configuration Window
VLAN Definition Menu
page 1
VLAN Name
ID
All Ports On VLAN
Default VLAN
1
5,6
Building102
2
1,2
Building103
3
3,4
Add new table entry
Return to Virtual LAN Menu ...
VLAN Name:
Null (not configured)
(or enter a single ‘*’ to delete this entry)
ID
2
All Ports on VLAN
Null (not configured)
(Example: 1,3,8-14 or all)
Tagged Ports On VLAN
Null (not configured)
Note: Use Port to VLAN Configuration Menu for Port-based VLANs
Return to VLAN Definition Menu ...