Spektrum SPM1014 User Manual
Page 7
Advertising
During first installation, the receiver(s) must be bound to the transmitter module. Binding
is necessary to program the receiver(s) to distinguish its corresponding transmitter from
others. Also fail-safe positions are transferred from the transmitter to the receiver during
binding. See binding below for more details.
1. Make sure that the transmitter is switched off.
2. Remove the
current RF
module from
the transmitter.
3. Carefully insert
the DSM module
noting the
orientation of the
connector pins.
Installation
Instructions
Installing the Transmitter
Module
Advertising