Spektrum SPM2020 DX2 - Manual (Page 21)

21
Accessing the Travel Adjust Function
To access the Travel Adjust feature, follow the step below:
Press the MODE key until TRV
ADJ appears on the screen MODE CHANNEL
ENTER
SYSTEM
Press the CHANNEL key to
select the channel to be adjusted
(steering or throttle)
Move the wheel/trigger or Grip
Lever A in the desired direction
and press either the
INCREASE
or DECREASE keys to achieve
the desired travel value
INCREASE DECREASE
CLEAR
DIRECT
+ –
1. Turn on the transmitter power switch.
2. Press the
MODE key to enter the Function Mode.
3. Press the MODE key until TRV ADJ appears in small letters on the left side
of the screen.
4. Press the CHANNEL key to select the desired channel to be adjusted. Steering = STR
(steering right) or STL (steering left); Throttle = FWD (forward) or BRM (braking or
reverse)
5. Move the steering wheel, trigger or Grip Lever A in the desired direction for adjustment
(left/right, forward/reverse or brake). Press the INCREASE or DECREASE key to
achieve the desired amount of travel. Move the wheel, trigger or Grip Lever A in the
opposite direction to adjust the travel in the opposite direction.
6. Press the MODE key to access the Steering Dual Rate function.
7. To exit the Function Mode, either turn off the transmitter power switch or press the
MODE and CHANNEL keys at the same time.
Note: When setting the travel adjust values for the steering function, it’s suggested that if
possible the maximum travel values be set to an equal value in both directions to
maintain proper steering control.
Travel Adjust
(Function Mode)
(Continued)