Nikon D5300 User Manual
Page 272

252 Technical Notes
Photos are out of focus
:
• AF-S or AF-I lens is not attached: use AF-S or AF-I lens or focus manually.
• Camera unable to focus using autofocus: use manual focus or focus lock (
• Camera is in manual focus mode: focus manually (
Focus does not lock when shutter-release button is pressed halfway
: Use
A (L) button to lock focus
when live view is off and AF-C is selected for focus mode or when photographing moving
subjects in AF-A mode (
Can not select focus point
:
•
e (Auto-area AF; 0 53) is selected: choose another AF-area mode.
• Press shutter-release button halfway to start standby timer (
Can not select AF-area mode
: Manual focus selected (
AF-assist illuminator does not light:
• AF-assist illuminator does not light if AF-C is selected for autofocus mode (
continuous-servo autofocus is selected when the camera is in AF-A mode. Choose AF-S. AF-
assist is also not available when 3D-tracking is selected for AF-area mode; if single-point or
dynamic-area AF is selected, select center focus point (
• The camera is currently in live view or a movie is being recorded.
• Off is selected for Custom Setting a3 (Built-in AF-assist illuminator,
• The AF-assist illuminator can not be used in some shooting modes (
• Illuminator has turned off automatically. Illuminator may become hot with continued use;
wait for it to cool down.
Image size can not be changed
: An NEF (RAW) option is selected for image quality (
Camera is slow to record photos
:
• Depending on shooting conditions and memory card performance, access lamp may light
for up to about a minute after shooting ends in continuous release modes.
• Turn long exposure noise reduction off (
Noise (bright spots, randomly-spaced bright pixels, fog, or lines) appear in photos
:
• Choose lower ISO sensitivity or turn high ISO noise reduction on (
• Shutter speed is slower than 1 s: use long exposure noise reduction (
• Turn Active D-Lighting off to avoid heightening the effects of noise (
No photo taken when remote control shutter-release button is pressed
:
• Replace battery in remote control (
• Choose remote control release mode (
• Flash is charging (
• Time selected for Custom Setting c4 (Remote on duration (ML-L3),
0 187) has elapsed.
• Bright light is interfering with ML-L3 remote control.
Beep does not sound
:
• Off is selected for Custom Setting d1 (Beep;
0 187).
• Camera is in quiet shutter-release mode (
0 48), or movie is being recorded (0 126).
• MF or AF-C is selected as the focus mode or subject moves when AF-A is selected (
Smudges appear in photographs
: Clean front and rear lens elements. If problem persists, perform
image sensor cleaning (
Date is not imprinted on photos
: An NEF (RAW) option is selected for image quality (