HID HDPii Plus User Guide 2.0 - Manual (Page 26)

HDP5000 & HDPii Card Printer Encoder User Guide_L000950, 2.0
Page 26 of 103 December 2012
© 2012 HID Global Corporation. All rights reserved
• Setting column: Displays the type of setting
• Default column: Displays the default setting value
• Current column: Displays the current setting value
Change the Current value by clicking the field to activate the control and enter the new
value.
• Apply button: Applies changed values.
• Restore Defaults button: Restores default values.
3.7.1 Using the Image Darkness Setting
Use the Image Darkness Setting to adjust the overall darkness of the printed image by increasing
or decreasing the amount of heat used by the Printhead when printing.
Step Procedure
1 Lighten the printed image by clicking or enter the exact negative value decreasing the Printhead
heat.
Darken the image by clicking or entering a positive value increasing the amount of Printhead
heat.
IMPORTANT: If the Image Darkness Setting is set too high, the Ribbon may jam or break.