Karcher K 2-20 M Plus - Manual (Page 8)

8 English
ƽ WARNING
To avoid serious injury never point
spray nozzle at yourself, other per-
sons or animals.
Always test an inconspicuous area
before cleaning with high pressure.
This nozzle features a steady powerful
high pressure spray pattern, for general
cleaning.
 This nozzle features a 0º pencil jet
which rotates 360º for maximum dirt
cutting action, effectively increasing
cleaning performance up to 50%.
This nozzle combines the cleaning
performance of a 0º pencil jet with
the surface coverage of a wide angle
nozzle.
Not recommended for soft materi-
als, siding, painted surfaces,
decks or autos.
 Before cleaning any surface an in-
conspicuous area should be cleaned
to test spray pattern and distance for
maximum cleaning results.
Detergents can only be applied at low
pressure.
 STEP 1:
Fill a container with Kärcher deter-
gent. Place the filter end of detergent
siphon tube into the container.
 STEP 2:
Detach spray wand from the trigger
gun.
A low-pressure jet is generated if no
spray wand is attached to the trigger
gun.
 STEP 3:
Turn on the pressure washer (I). Pull
trigger to operate unit. Liquid deter-
gent is drawn into the unit and mixed
with water. Apply detergent to work
area. Do not allow detergent to dry
on surface.
 STEP 4:
To rinse, insert the spray wand and
pull trigger to operate unit.
 STEP 5:
Cleaning up: Always draw fresh wa-
ter through the detergent tank or si-
phon tube when done to flush any
remaining detergents from the injec-
tion system.
USING THE ACCESSORIES
Spray wand
Dirtblaster®
WORKING WITH
DETERGENTS