Delay start timer – AEG LAVATHERM 57520 User Manual
Page 17
Drying
17
0 If required, select the button W SPECIAL
CARE,
P AUDIBLE SIGNAL, < QUICK DRY.
•
W SPECIAL CARE button
This programme operates with reduced heat.
Press the
W SPECIAL CARE button for fabrics bearing the care symbol
S. Gentle drying is advisable for heat-sensitive fabrics (such as acrylic
and viscose). The
W SPECIAL CARE button has no effect if the < QUICK
DRY button has already been pressed.
•
P AUDIBLE SIGNAL button
During the crease-protection phase (immediately after the drying
process), an acoustic signal is sounded at certain intervals (see "End of
drying process").
•
< QUICK DRY button
The selected programme runs on a shortened programme to produce
the same degree of drying. The
< QUICK DRY button cannot be used
with COTTONS
4
DAMP,
5
HAND IRON and
6
MACHINE IRON pro-
grammes or with the
9
EASY CARES DAMP programme. The
< QUICK
DRY button has no effect if the
W SPECIAL CARE button has already
been pressed.
Delay start timer
Using the delay start timer you can delay the start of the drying pro-
gramme by 3, 6 or 9 hours.
0 Setting the programme.
0 Hold down the ] DELAY TIMER button until the
required number of hours before the programme is
to start is shown in the display panel.
0 Press X/i START/PAUSE button.
After the set number of hours has passed the tumble
dryer will automatically begin the set drying programme. The number
of hours until the set drying programme is due to begin is shown in the
display panel.
You can adjust the pre-selected delay start at any time.