Getting started, Canceling the demo mode, Setting the clock – Sony DSX-A30 User Manual

Page 4

Advertising
background image

4

Getting Started

Switching the FM/AM
tuning step (for non-
Argentine models)

The FM/AM tuning step is factory-set to the
50 kHz (FM)/9 kHz (AM) position. If the
frequency allocation system of your country
is based on 200 kHz (FM)/10 kHz (AM) or
100 kHz (FM)/10 kHz (AM) step, set the
tuning step before use.
This setting appears when turned off.

1

Press and hold the select button.
The setup display appears.

2

Rotate the control dial until “TUNER-
STP” appears, then press it.

3

Rotate the control dial to select from
“50K/9K,” “100K/10K” or “200K/10K,”
then press it.

Receivable frequency by selected frequency
setup:
FM 50 kHz: 87.50 MHz, 87.55 MHz, 87.60
MHz...
FM 100 kHz: 87.5 MHz, 87.6 MHz, 87.7
MHz...
FM 200 kHz: 87.5 MHz, 87.7 MHz, 87.9
MHz...
AM 9 kHz: 531 kHz, 540 kHz, 549 kHz...
AM 10 kHz: 530 kHz, 540 kHz, 550 kHz...

Canceling the DEMO
mode

You can cancel the demonstration display
which appears during turning off.

1

Press and hold the select button.
The setup display appears.

2

Rotate the control dial until “DEMO”
appears, then press it.

3

Rotate the control dial to select
“DEMO-OFF,” then press it.
The setting is complete.

4

Press

(BACK).

The display returns to normal reception/
play mode.

Setting the clock

The clock uses a 12-hour* digital indication.

* The Argentine model uses a 24-hour indication.

1

Press and hold the select button.
The setup display appears.

2

Rotate the control dial until “CLOCK-
ADJ” appears, then press it.
The hour indication flashes.

3

Rotate the control dial to set the hour
and minute.
To move the digital indication, press

 –/+.

Advertising