If the washing results are not satisfactory – AEG LAVAMAT W 1030 User Manual

Page 27

Advertising
background image

Operating instructions

27

If the washing results are not satisfactory

If the washing is grey and there are calcium deposits in the drum

• Too little detergent was used.

• The wrong detergent was used.

• Special soiling was not pre-treated.

• Program or temperature not set correctly.

• When using component detergents, the individual components were

not used in the correct proportions.

If there are still gray stains on the washing

• Washing soiled with ointments, grease or oils was washed with too

little detergent.

• Too lower temperature was used for washing.

• A common cause is that softener – particularly that in concentrated

form – has got onto the washing. Wash out any such spots as quickly
as possible and use that particular softener carefully.

If at the end of the last rinse foam is still visible

• Modern detergents can cause foam also in the last rinse. The washing

is however sufficiently rinsed.

If there are white remnants on the washing

• This is an insoluble material contained in modern detergents.

This is not the result of unsatisfactory rinsing.
Shake or brush the washing. Perhaps you should turn the washing
inside out before washing in future. Reconsider choice of detergent,
possibly use liquid detergent.

Advertising