Sony DCR-DVD100 - Manual (Page 29)

29
Shooting movies/still images
Shooting movies
Perform “Getting Started” from step 1 to 6 beforehand (page 15).
The following operation is common with VIDEO mode and VR mode.
1
Remove the lens cap by pressing both knobs on the sides of the cap.
2
Install the battery pack or connect the AC adaptor (page 15).
3
Open the LCD screen while pressing OPEN.
The image is not displayed in the viewfinder when the LCD screen opens.
4
Set the mode dial to (Movie).
5
Turn the power on by sliding the POWER switch upward while pressing the
green button.
6
Insert a disc (page 26).
This sets your camcorder to standby.
1
2
3
4
5
6
7
Recording
lamp
Shooting movies/still images
STBY0:00:00 -R
VIDEO