Sony RM-NU1 - Manual (Page 73)

73 GB
T
ro
ubl
e
s
ho
oti
n
g
, If you have reset the unit or have performed a system
recovery on your server, make the network settings
again (page 23).
, The server and renderer (network controlled player)
cannot accept commands from this unit temporarily
for some reason.
, Make sure that the server and renderer (network
controlled player) is turned on.
, The server and renderer (network controlled player)
may be unstable. Restart it.
, Confirm that the unit, the server and renderer
(network controlled player) are connected to the
router/wireless LAN router/access point correctly.
, Confirm that the server and renderer (network
controlled player) has been correctly set (page 32).
, Confirm that the unit has been registered with the
server and renderer (network controlled player) and
is set to allow music streaming from the server.
, If the ICF (Internet Connection Firewall) function is
active on the computer, this may prevent the unit
from connecting to the computer (only when your
computer is used as a server). You may need to
change the firewall settings to allow the unit to
connect. (For details on changing the firewall
settings, refer to the operating manual of your
computer).
, The renderer (network controlled player) may not be
able to change the playback position.
, You may have turned this unit on before you turned
the server on. Display the server list first, then tap
“Refresh” after tapping “Options” on the side menu
to refresh the server list.
, Make sure that the router/wireless LAN router/access
point is turned on.
, Make sure that the server is turned on.
, Confirm that the server has been set correctly
(page 32).
, Confirm that the unit has been registered with the
server and is set to allow music streaming from the
server.
, Only the server which includes content of the
selected Activity is displayed on the server list. In
this case, servers other than the above server do not
appear, even if the power switch is turned on.
, The bandwidth of your wireless LAN may be too
low. Move the unit and the wireless LAN router/
access point closer to each other, without any
obstacles between them.
, When using your computer as a server, the computer
may be running many applications. If anti-virus
software is active on the computer, temporarily
disable that software as it needs large amounts of
system resources.
, Depending on the network environment or radio
interference, it may not be possible to play content
with more than one device operating at one time.
Turn off any other devices to enable the unit to play
content.
, Permit access from this unit to the server and
renderer (network controlled player) settings.
, You can turn on a server which supports the WOL
(Wake On LAN) function. Turn the server on
manually when you are using a server which does not
support the WOL function.
, Make sure the server and renderer (network
controlled player) are connected to your home
network.
, “--” is displayed when the total number of content
items exceeds 999.
, Those items do not appear when the duration of
content cannot be obtained.
Network / Playback content
on your server
The unit cannot connect to a network.
The unit fails to operate a device.
Content is played back from the beginning,
even if you change the playback mode or
playback range.
The server (such as a computer) does not
appear in the server list.
The sound or the video skips during playback.
The unit cannot access the server and
renderer (network controlled player).
You cannot turn the server on using this unit.
“The power of the player device is not turned
on. Turn the device on.” appears on the
screen even if the server and renderer
(network controlled player) are turned on.
The total number of content items is displayed
as “--.”
The currently elapsed time, total time, and
progress bar do not appear on the playback
screen.