Sony CMT-MX700Ni - Manual (Page 56)

56 GB
Using the Play Timer
You can set the Play Timer to start playing a CD,
USB, iPod/iPhone, or to tune in an FM station or
DAB/DAB+ station (CMT-MX750Ni only) at a
specified time (Play Timer function). Make sure
that the time on the clock is set correctly.
1
Prepare the sound source.
Select the sound source, and then press
VOLUME +/– to adjust the volume.
To start from a specific CD track or audio
file, create your own program.
2
Press TIMER MENU.
3
Press M/m repeatedly to select
“PLAY SET?,” then press ENTER.
The setting display for “ON TIME” appears.
4
Set the time to start playback.
1 Press M/m repeatedly to set the
hour, then press ENTER.
The cursor moves to the minute position.
2 Press M/m repeatedly to set the
minute, then press ENTER.
The setting display for “OFF TIME”
appears.
5
Set the time to stop playback.
Repeat step 4 to set the hour and minute to
stop playback.
6
Press M/m repeatedly to select the
desired sound source to play, then
press ENTER.
7
Press ?/1 to turn off the system.
Tip
The Play Timer setting remains until you cancel the timer
manually.
Notes
• The Play Timer setting is erased if you unplug the
power cord from the wall outlet.
• If the system is already turned on at the preset time, the
Play Timer will not be activated. Do not operate the
system from the time the system turns on until the
playback starts.
• The ending time for the Play Timer cannot be the same
as the starting time.
Notes for the iPod/iPhone user
• Make sure the iPod/iPhone is not playing when using
the Play Timer.
• The Play Timer may not be activated depending on the
status of the connected iPod/iPhone.
To check the setting
1
Press TIMER MENU.
2
Press M/m repeatedly to select “TIMER
SELECT?,” then press ENTER.
3
Press M/m repeatedly to select “PLAY
SELECT?,” then press ENTER.
To cancel the timer
Repeat the same procedure as above until “TIMER
OFF?” appears in step 3, then press ENTER.
To change the setting
Start over from step 1.