Sony STR-DA6400ES - Manual (Page 128)

128 GB
Quick Click settings
Controls components connected to the receiver
using the on-screen remote.
Selects the source component that is to be
operated.
x Preset Mode
Customizes the remote to match the source
components connected to your receiver.
x Learn Mode
Allows the remote learn codes.
x Reset
Resets both programmed codes and learned
codes.
Selects the common component such as a TV,
projector or lights that is to be operated.
x Preset Mode
Customizes the remote to match the common
components such as the TV, the projector and
the lightings connected to your receiver.
x Learn Mode
Allows the remote to learn codes.
x Reset
Resets both programmed codes and learned
codes.
Sets several commands in a sequential order as
a single command.
System settings
Customizes the settings of the receiver.
Lets you activate the screen saver function for
the GUI menu on the TV connected to the
receiver.
x OFF
The screen saver function is disabled.
x ON
When there has been no operation attempted
for 15 minutes, the screen saver function is
activated automatically.
Lets you use this menu for the zone 2/zone 3
operation.
x OFF
x ON
Selects the language for the messages on the
screen.
x English
x Español
x Français
x Deutsch
Lets you upgrade the firmware of the receiver.
Refer to “Using Network Features” supplied
with these operating instructions for details.
Source Component
Common Component
Macro Setup
Screen Saver
RS-232C Control
Language
System Update