Sony DCM-M1 - Manual (Page 108)

108
Maintenance
Camcorder
Clean the camcorder body with a dry soft cloth, or a soft cloth lightly moistened with a
mild detergent solution. Do not use any type of solvent which may damage the finish.
Lens
Clean the lens with a commercially available blower.
LCD screen
If fingerprints or dust make the LCD screen dirty, we recommend using a LCD
Cleaning Cloth (not supplied) to clean the LCD screen.
Charging the vanadium-lithium battery in your camcorder
Your camcorder is supplied with a vanadium-lithium battery installed so as to retain
the date and time, etc., regardless of the setting of the POWER switch. The vanadium-
lithium battery is always charged as long as you are using your camcorder. The battery,
however, will discharge gradually if you do not use your camcorder. It will be
completely discharged in about four months if you do not use your camcorder at all.
Even if the vanadium-lithium battery is not charged, it will not affect the camcorder
operation. To retain the date and time, etc., charge the battery if it is discharged.
Charging the vanadium-lithium battery:
Connect your camcorder to house current using the AC adaptor/charger supplied with
your camcorder, and leave your camcorder with the POWER switch turned off for more
than 24 hours.
Calibrating the LCD screen (touch panel)
If the touch panel does not react correctly when you touch it, calibrate the touch panel.
(1) Set the POWER switch to OFF.
(2) Eject the disc.
If you have connected other equipment, disconnect them.
(3) Open the LCD panel.
(4) While pressing DSPL and x
together, set the POWER switch to PLAY/EDIT.
(5) Touch the marks displayed on the LCD screen one by one.
(6) Turn the LCD panel over and close it to the camcorder body,
(7) Touch the
marks displayed on the LCD screen one by one.
(8) Touch FINISH.
The index display appears.
Precautions and maintenance information