AEG 73742 - Manual (Page 9)

Display
9.1 9.2 9.3 9.9
9.4 9.5 9.6 9.7 9.8
9.1 - Temperature indicator and COLD symbol
9.2 - Spin Speed indicator, RINSE HOLD , NIGHT CYCLE - symbols
9.3 - Programme progress display: PREWASH , MAIN WASH , RINSE , SPIN ,
DRAIN , OVERDOSAGE
• The programme progress display shows the washing phases of the selected programme.
• During a washing cycle, a black line blinks under the washing phase symbol of the run-
ning programme. At the end of each washing phase, the line under the corresponding
symbol becomes fixed.
If the OVERDOSAGE symbol lights up at the end of the programme, it indicates that too
much detergent has been used.
9.4 - Options: PREWASH , STAIN , SENSITIVE , EXTRA RINSE
9.5 - DOOR - symbol (Door locked)
• This symbol indicates if the door can be opened:
– the symbol is on: the door cannot be opened. The appliance is performing a washing
programme.
– the symbol is off: the door can be opened. The washing programme is finished.
9.6 - TIME SAVING - option symbol
9.7 - The display shows the following information:
• Duration of the selected programme
– After selecting a programme, the duration is displayed in hours and minutes (for ex-
ample . The duration is calculated automatically on the basis of the maximum
recommended load for each type of fabric.
– After the programme has started, the time remaining is updated every minute.
• Delay start
– The selected delay (20 hours max) set by means of the relevant button appears on the
display for about 3 seconds (for example ), then the duration of the previously
selected programme is displayed.
– The DELAY START symbol will appear on the display.
– The delay time value decreases by one unit every hour and then, when remains 1 hour,
the time decreases every minute.
• Incorrect option selection
9