Drive mode, Cyber-shot user guide – Sony DSC-RX100 User Manual
Page 96
Search
Top page > Using MENU items (Shooting) > Still shooting menu > Drive Mode
Drive Mode
You can set a drive mode, such as continuous, self-timer, or bracket shooting.
[Drive Mode] can be set using the /
(Drive Mode) button.
1.
MENU
2
[Drive Mode]
desired mode
Press
/
on the control wheel to select the desired setting when selecting a mode with its
own setting values.
(Single
Shooting)
The camera shoots a single image without using the self-timer.
(Cont.
Shooting)
The camera shoots continuous images while the shutter button is pressed.
(Spd
Priority
Cont.)
Shoots images continuously at high speed while you press and hold down the
shutter button. Focus and brightness settings of the first shot are used for the
following shots.
(Self-
timer)
Sets the self-timer to a 10-second or 2-second delay.
When you press the shutter button, the self-timer lamp flashes and a beep sounds
until the shutter operates.
To cancel, press /
again.
(Self-
portrait)
Sets the self-timer to Self-portrait timer.
When the camera detects the specified number of faces, a beep sounds, and the
shutter operates 2 seconds later.
(Self-
timer(Cont))
The camera shoots continuous frames 10 seconds later after you press the shutter
button. Select the number of frames from three or five.
(Bracket:
Cont.)
Shoots three images, each with different degrees of brightness. You can set the
value of bracket deviation (steps).
(WB
bracket)
Shoots three images, each with different degrees of brightness according to the
selected settings of white balance, color temperature and color filter. You can select
the value of bracket deviation (steps) from [Lo] or [Hi].
Related Topic
Drive Mode
Still shooting menu items not available in some REC modes
Copyright 2012 Sony Corporation
89
Search