Sony DEV-50 - Manual (Page 28)


GB
Additional information
Troubleshooting
If you run into any problems using this
product, follow the steps below.
 Check the list on this page, and
inspect this product.
 Remove the power source, attach
the power source again after about
1 minute, and turn this product on.
 Select (MENU)  [Setup] 
[ General Settings]  [Initialize].
If you select [Initialize], all settings,
including the clock setting, are reset.
 Contact your Sony dealer or local
authorized Sony service facility if the
issue is not resolved.
See “Digital Recording Binoculars Handbook”
(p. 11) for details on the symptoms of this
product, and “PlayMemories Home Help
Guide” (p. 23) on connecting this product to a
computer.
The power does not turn on.
Attach a charged battery pack to this product
(p. 13).
This product does not operate even when
the power is set to on.
Disconnect the AC Adaptor from the wall
outlet (wall socket) or remove the battery
pack, then reconnect it after about 1 minute.
This product gets warm.
This product may become warm during
operation. This is not a malfunction.




Self-diagnosis display/Warning
indicators
If indicators appear on the viewfinder
screen, check the following.
If the problem persists even after you
have tried to fix a couple of times, contact
your Sony dealer or local authorized Sony
service facility. In this case, when you
contact them, give them all the numbers of
the error code beginning with C or E.
C:04:
The battery pack is not an “InfoLITHIUM”
battery pack V series. Use an “InfoLITHIUM”
battery pack (V series) (p. 13).
Connect the DC plug of the AC Adaptor to
this product securely (p. 13).
C:06:
The battery pack temperature is high. Change
the battery pack or place it in a cool place.
C:13: / C:32:
Remove the power source. Reconnect it and
operate this product again.
E::
Follow the procedure from  in
“ Troubleshooting.”
The battery pack temperature is high. Change
the battery pack or place it in a cool place.





