Sony DSC-HX400V - Manual (Page 81)

mode to [Manual Exposure] while set to [ISO AUTO], the ISO value is switched to the lowest
value. Set the ISO in accordance with the shooting conditions.
When you use [Multi Frame NR], it takes some time for the product to perform the overlay
processing of images.
Hint
You can change the automatically set range of ISO sensitivity in the [ISO AUTO] setting.
Select [ISO AUTO] and press the right of the control button, and set the desired values for
[ISO AUTO Maximum] and [ISO AUTO Minimum]. The settings [ISO AUTO Maximum] and
[ISO AUTO Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi
Frame NR].
How to Use Using shooting functions Selecting the ISO sensitivity
Multi Frame NR
The product automatically shoots multiple images continuously, combines them, reduces the
noise, and records them as one image. With multi frame noise reduction, you can select larger
ISO numbers than the maximum ISO sensitivity. The image recorded is one combined image.
1. MENU → (Camera Settings) → [ISO] → [Multi Frame NR].
2. Press the right button on the control button to display the setting screen, then select a
desired value using the up/down button.
Note
The flash, [D-Range Opt.], and [Auto HDR] cannot be used.
Hint
You can change the automatically set range of ISO sensitivity in the [ISO AUTO] setting.
Select [ISO AUTO] and press the right button, and set the desired values for [ISO AUTO
Maximum] and [ISO AUTO Minimum]. The settings [ISO AUTO Maximum] and [ISO AUTO
Minimum] are also applied when shooting in [ISO AUTO] mode under [Multi Frame NR].
How to Use Using shooting functions Correcting the brightness or contrast
71